SYM VTS 200 Belt Replacement

Replacement of belt on this SYM Scooter is not difficult to do, what needed are basic tools and some technical know how.


Some Photos on the steps.


First disconnect the air hose from the cover front.

 Remove 9 - 8mm Screw for belt cover and 1 - 10mm screw for the air box mount.

 These are the screws, the longer screw located near the air box screw.

Before re installation, don forget the two locator pin.

At the location as below.

 Installation is reverse of removal.

This link here is on the Dr. Pulley slider replacement and can be use as a guide on what tools are required, following is a short video clip that I did on belt replacement.